The Caravan Starter Pack is designed for Caravanners for use in the hard red and gravelly dirt of the Outback and also sandy loam soils..
8x Ezy Anchors 4x Coastal pegs at 280mm long 4x Outback pegs at 200mm long 1x Torx T50 driver bit 1x Torx T50 manual removal L key 2x Caravan Double Guy Ropes with Velcro straps, stainless clips, trace springs, cleats and reflective double braided polyester rope 1 Ezy Anchor Canvas tent peg bag with zip pocket
These packs have been determined by months of personal use and testing in both types of the areas detailed above and also research throughout Central and Outback Australia
Take your cordless drill or impact driver
Connect the Torx driver bit to the drill/driver and secure in the chuck
Pick up your Ezy Anchor with screw in position through the Ezy Anchor
Connect your guy rope to the hook
Hold the guy rope and hook together with your guiding hand
Pick up the drill and driver in your driving hand
Insert the Torx driver into the head of the screw
Place drill in forward drilling position
Commence drilling the screw downward into the earth keeping the EzyAnchor parallel to the earth so the screw penetrates at its set angle.
Should you strike a solid object whilst installing the screw, remove and reposition the screw to another position close to or adjacent to the original required position.
With your drill in hand and Torx driver bit connected and secured within your drill chuck connect the Torx bit driver to the screw head.
Hold the hook and guy rope in one hand, place drill in reverse and screw out.
*In the event of a flat battery you can connect a shifting spanner to the driver bit shaft and unscrew manually to a point where you can remove the screw from the ground. **Remember to regularly charge your drill or impact driver battery.